• New

ROTARY TABLE KIT 5" WITH CHUCK , FIXTURE PLATE, TAILSTOCK AND DIVIDING PLATES

A complete rotary table set for all small and medium sized milling machines

$379.95
Quantity

ROTARY TABLE KIT 5" WITH CHUCK , TAILSTOCK AND DIVIDING PLATES

This rotary table is compact for maximum clearance, mounts horizontally or vertically and has a 360 degree marking on the table and a vernier scale on the handle for finer increments.

It has a nice twin locks to secure the table in place. It has a 3 piece set of dividing plates for all your work with handle and brass sector plus an adjustable tailstock for supporting longer stock.  

Top quality for all medium sized milling machines.

Rotary table for all mini mills like Taig, Sherline and Grizzly as well as mill drills and combo machines like Shopmaster, Smithy, Grizzly, Bolton  and all cnc machines.

This is the finest quality set available, made from graded cast iron precision ground and using a hardened and ground adjustable mesh worm gear.

The Rotary table is graduated into 360 degrees with precision markings with a 90-1 ratio to the handwheel making each rotation of the handle equal to 4 degrees. 

The handwheel dial is divided into increments of 1 minute, plus it has a vernier scale allowing divisions down to 10 seconds.  The dividing plate set has three plates to cover all possible divisions, a set of sectors and a spring loaded adjustable pin handle to lock in each division.  

A 3" diameter scroll 4 jaw chuck is mounted onto a special fixture plate which centers on the table and is held in place with 4 t-nuts. The fixture plate has a series of holes for use with any odd sized objects and also has the mounting bolt circle for the 3 jaw self centering chuck.  Other chucks are available in 3 jaw as well as other sizes from our website.  The tailstock is used to support longer parts for operations like gear and spline cutting. It is adjustable for height and has machinable keys to be fitted to a variety of machine T-slots.  

A set of T nuts and studs is included for mounting the table to your machine.  The set comes with a detailed instruction manual on usage of the rotary table, dividing plates etc. and a full spare parts breakdown with illustrations and part numbers.  We maintain spares in case of breakage or damage.

CENTER HOLE TAPER   MT 2

BASE TO TABLE SURFACE  3"

CENTER HEIGHT IN VERTICAL MOUNT POSITION 3.75"

THIS ROTARY TABLE SET CONTAINS:

1  5"  HORIZONTAL/VERTICAL ROTARY TABLE

1  80 MM 4 JAW SCROLL  CHUCK WITH ALUMINUM FIXTURE PLATE

1  ADJUSTABLE TAILSTOCK

1  SET OF 3 DIVIDING PLATES AND SECTOR

1  16 PIECE CLAMP SET

We also offer a CNC upgrade kit for this table which offers full automation while retaining all the manual functions.  Please search our website for part # ST32K

Fast priority mail delivery means you have your set in hand within a few days of your order.   

These are top quality precision units- be wary of low price factory rejects or damaged units being sold direct from overseas sources. 

113311
19 Items

14 other products in the same category: