METRIC TAILSTOCK SCREW AND NUT
TAILSTOCK LEAD SCREW AND NUT
This is a lead screw made for a tailstock- it is a spare part for Shoptask machines from 1990 to 1995.
It can be fitted to any other lathe or used as a lead screw for other purposes.
The thread is left hand 5 TPI. The screw is 15.75MM ( 5/8) and the OD of the nut is 24 MM. there is a 15 mm section on the handle end for your bearing or bushing and the handle portion is 12 mm. There are 10 mm X 1.5 threads on the end to secure the handle.