INCH TAILSTOCK SCREW AND NUT
TAILSTOCK LEAD SCREW AND NUT
This is a lead screw made for a tailstock- it is a spare part for Shoptask machines from 1996 to 2010.
It can be fitted to any other lathe or used a s a lead screw for other purposes. The thread is left hand 10 TPI. The screw is 15.75MM ( 5/8) and the OD of the nut is 24 MM. There is a 15 mm section on the handle end for your bearing or bushing and the handle portion is 12 mm.
There are 10 mm X 1.5 threads on the end to secure the handle.