MINI LATHE MILLING ATTACHMENT

TURN YOUR LATHE INTO A MILL- SAVES YOU MANY HUNDREDS

TOP QUALITY UNIT-Ships from USA- be wary of factory rejects being shipped from India

$79.95
Quantity
Out-of-Stock

A precision ground assembly made of the finest close grain cast iron machined and ground to perfection. This is a milling attachment for Mini Lathes.  Remove your toolpost and attach this unit to the cross slide.  Standing vertically, the milling attachment has a 2"  X  3.75" sliding table with 2  T slots.  The T slots are .25" wide at the top and .375" wide at the bottom.  There are 2 movable vise jaws held to the table with T nuts and bolts.  Each jaw can be moved along the table to adjust for various sized parts.  One jaw has 3 clamp bolts to secure your part.  The jaws can be removed and the T nuts can be used to secure odd shaped pieces directly to the table.  The table also has 2 T slots along the side which are 0.115" at the narrow and 0.166" at the wide.  The moving table travels on a precise dovetail with a brass gib strip with 3 adjusters.  The table has a total travel of 2".  Movement of the table is by a precision screw with a handle with 2 beautiful brass extensions.  The dial has 50 increments each measuring 0.001" for a total of 0.50" per revolution.  

Securely packaged and shipped immediately to you by priority mail.

PLEASE NOTE:  This is a generic brand milling attachment. Some mini lathes have the slots for the included T-Nuts for mounting, but some may require drilling and tapping the mounting holes.

110370

16 other products in the same category: